A Slug Catcher is used to collect liquids that have settled in flow lines which can overload the gas/liquid handling capacity of the plant especially during pigging operations.
Slug Catcher helps protect your valuable production equipment from abrupt large bursts of liquids entering your gas stream.
A mud pump is a reciprocating piston/plunger device designed to circulate drilling fluid under high pressure (up to 7,500 psi (52,000 kPa) ) down the drill string and back up the annulus.
A mud pump is a large reciprocating pump used to circulate the mud (drilling fluid) on a drilling rig. It is an important part of the oil well drilling equipment.
In oil and gas production a choke manifold is used to lower the pressured from the well head. It consist of a set of high pressure valves and at least two chokes. These chokes can be fixed or adjustable or a mix of both.
A mud pump is a large reciprocating pump used to circulate the mud (drilling fluid) on a drilling rig. It is an important part of the oil well drilling equipment.
The drilling fluid manifold mainly consists of ground pipelines, ground valves assembly, T-joints, stand pipelines, stand pipe valves assembly, gooseneck, roatary hose and pressure gauges.
The whole manifold is connected by the spherical unions, using high strength alloy steel material and heat refining. This structure is easy to assemble and disassemble; Seals use rubber "O" ring; All parts of the manifold are through strength test in order to ensure performance requirements.
A device that can be used to quickly seal the top of the well in the event of a well control event (kick). A ram blowout preventer (BOP) consists of two halves of a cover for the well that are split down the middle.
A ram-type BOP is similar in operation to a gate valve, but uses a pair of opposing steel plungers, rams. The rams extend toward the center of the wellbore to restrict flow or retract open in order to permit flow.
A large valve used to control wellbore fluids. In this type of valve, the sealing element resembles a large rubber doughnut that is mechanically squeezed inward to seal on either pipe (drill collar, drillpipe, casing, or tubing) or the openhole.
The ability to seal on a variety of pipe sizes is one advantage the annular blowout preventer has over the ram blowout preventer.
A mud tank is an open-top container, typically made of square steel tube and steel plate, to store drilling fluid on a drilling rig.
In oil drilling, a casing head is a simple metal flange Welded or screwed onto the top of the conductor Pipe.
Shale Shakers are the first phase of a solids control system on a drilling rig, and are used to remove large solids (cuttings) from the drilling fluid.
A traveling block is the freely moving section of a block and tackle that contains a set of pulleys or sheaves through which the drill line (wire rope) is threaded or reeved and is opposite (and under) the crown block (the stationary section).
Drill line spoolers are designed to store drill line for a drilling rig. They are made to wind and unwind, with controlled tension, the drill line as the rig requires.
The fixed set of pulleys (called sheaves) located at the top of the derrick or mast, over which the drilling line is threaded.
A stand (of drill pipe) is two or three joints of drill pipe connected and stood in the derrick vertically, usually while tripping pipe.
A mechanical device that suspends the weight of the drill string. It is designed to allow rotation of the drill string beneath it conveying high volumes of high- pressure drilling mud between the rig's circulation system and the drill string.
A rotary table is a mechanical device on a drilling rig that provides clockwise rotational force to the drill string to facilitate the process of drilling.
A wellhead is the component at the surface of an oil or gas well that provides structural and.
The function of stabbing guide is to guide an add-on pile into an existing pile and also to provide a pile alignment. The stabbing guide is defined as an installation aid which is not being considered as a permanent offshore structure.
A draw works is the primary hoisting machinery component of a rotary drilling rig. Its main function is to provide a means of raising and lowering the traveling block.